Synthesis,Characterization of Cr Doped TeO2 Nanostructures and its Application as EGFET pH Sensor

In the present work, Cr doped tellurium dioxide nanostructures (CTO NS)(1 wt %, 6 wt %, 8 wt % and 12 wt %) synthesized by co precipitation method and characterized by CV, UV-Visible, SEM, XRD, XPS spectroscopic analysis. Electron beam deposited thin film of CTO NS having 12 wt % of Cr exhibited EGFET-pH sensitivity of 62.03 mV/pH at 250 °C in buffer solutions of pH 6–12, linearity 0.9345, drift rate of 1.12 mV/h and deviation of 0.01145 as compared with 1 wt %, 6 wt % and 8 wt % of CTO NS.     

New ion exchange membrane derived from sulfochlorated polyether sulfone for electrodialysis desalination of brackish water

The purpose of this work is to study the desalination of brackish water using a new ion exchange membrane, made from sulfochlorated polyethersulfone (Cl‐PES), and crosslinked using aminated polyethersulfone (NH2‐PES) as a crosslinking reagent. This membrane, named ClNH2 membrane, has been obtained by reaction between Cl‐PES with 1.3 SO₂Cl groups per monomer unit and 0.2 equivalent amount of NH2‐PES. ClNH2 membrane has been characterized in terms of contact angle, transport number, intrinsic conductivity, and water uptake (as a function of temperature). Electrodialysis performances of the newly synthetized membranes have been measured using an electrodialysis cell at a laboratory scale and compared to commercial membranes. All the experiments have been performed using synthetic brackish water solutions prepared from sodium chloride salts with different concentrations (varying from 0.5 to 5.0 g/L). The concentration of different water samples obtained has been found to be below the amount recommended by the World Health Organization (WHO) for drinking water.     

Development of highly ionic conductive cellulose acetate-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co-methyl methacrylate) graft copolymer membranes

A novel cellulose acetate-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co- methyl methacrylate) copolymer was prepared via free radical polymerization for the first time. The chemical structure of the graft copolymer was confirmed using FT-IR, ¹H NMR and EDX. The TGA and DSC investigated the thermal changes. Factors affecting the grafting process were studied and various grafting characteristic parameters such as grafting efficiency (%), grafting yield (%) and add-on value (%) were determined. Flexible membranes based on different graft copolymer compositions were fabricated by simple solution casting. Physicochemical properties including ion exchange capability (IEC), water uptake (WU) and proton conductivity (σ) were evaluated. These membranes demonstrated higher IEC, WU and conductivity than the pristine CA. The maximum proton conductivity of the CA-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co- methyl methacrylate) copolymer membrane (68%; Add-on %) was found to be 6.44 × 10⁻³ S/cm compared with 0.035 × 10⁻³ S/cm of the pristine CA. Thus, the appropriate graft copolymer composition will allow fine-tuning of the physical characteristics and led to several potential applications, such as polyelectrolyte fuel cells membranes or biodiesel production.     

Prandtl Number in Classical Hard-Sphere and One-Component Plasma Fluids

The Prandtl number is evaluated for the three-dimensional hard-sphere and one-component plasma fluids, from the dilute weakly coupled regime up to a dense strongly coupled regime near the fluid-solid phase transition. In both cases, numerical values of order unity are obtained. The Prandtl number increases on approaching the freezing point, where it reaches a quasi-universal value for simple dielectric fluids of about ≃1.7. Relations to two-dimensional fluids are briefly discussed.     

Dithienylmaleimide-based D-A Conjugated Polymer Film: Photo-Responsive Behavior and Application in Electrical Memory and Logic Gates

Solid-stated smart polymers responsive to external stimuli have attracted much attention for potential application in the field of photoelectron devices, logic gates, sensor, data storage and security. However, it is a bigger challenge for polymers than that for small molecules in solid state to acquire stimuli-responsive properties, because polymers with high molecular weight are not as easy to change the packing structure as small molecules under external stimulation. Here, a D-A type alternating copolymer PTMF-o containing 3,4-bisthienylmaleimide(A unit) and fluorene(D unit) is designed and synthesized. Upon irradiation of sunlight, PTMF-o film exhibits a photo-response with the color altering from purple to colorless. It is attributed to the structure of copolymer transformed from ring-opening form(PTMF-o) to ring-closure form(PTMF-c), resulting from the oxidative photocyclization of 3,4-bisthienylmaleimide unit. Consequently, the ability of charge transfer(CT) from fluorene to 3,4-bisthienylmaleimide unit in PTMF-o can be easily weakened by light stimuli. PTMF-o film displays a WORM-type resistive storage performance for the strong CT. Interestingly, after exposure, the electrical memory behavior in situ transfers into FLASH type, due to weak CT in PTMF-c. PTMF-o film can also be employed as smart material to construct NAND and NOR logic gates by using light as input condition. The work provides a simple way to modify the electronic properties of polymers and realize stimuli-response in solid states.     

Al2O3/PDMS复合材料热传导的分子动力学模拟

采用分子动力学模拟方法研究了Al₂O₃/聚甲基二硅氧烷(PDMS)复合材料在300 K时的传热行为, 通过分析热传导、温度梯度以及导热增强等理论数据, 讨论了不同半径以及不同浓度的Al₂O₃填料粒子对PDMS传热的影响. 结果表明随着体积分数的增大, Al₂O₃/PDMS复合材料的热传导先减小后增加. 并且当Al₂O₃填充粒子的半径为5 nm时, Al₂O₃/PDMS复合材料的热传导达到最大值. 通过考察传热过程中的Al₂O₃填料和Al₂O₃/PDMS复合材料的温度和结构变化, 添加有小半径Al₂O₃填料的Al₂O₃/PDMS复合材料在传热的过程中主要以声子的形式进行传热, 此时决定热导率的主要因素有热容c、声子的平均速度v和声子的平均自由程l. 同时, 当体积分数为15%时, 传导链形成, 热量可以顺利通过Al₂O₃填料形成的传导链传播, 有助于热传导的增加.     

季铵盐阴离子交换膜研究进展

近年来,阴离子交换膜燃料电池的发展受到了广泛关注。开发具有碱稳定性能优异,电导率高的阴离子交换膜(AEMs)材料成为了研究的热点。AEMs主要由聚合物骨架和阳离子基团组成,这两者是影响膜碱稳定性和电导率的重要因素。本文综述了季铵盐类阴离子交换膜聚合物骨架结构中含有醚氧键和不含醚氧键的烷基季铵盐AEMs、N-螺环季铵盐AEMs和环季铵盐AEMs的碱稳定性、电导率等性能;总结了不同骨架结构季铵盐AEMs碱稳定性的差异;分析了季铵盐的降解机理。同时对于含有季铵盐阳离子交换基团的AEMs的结构设计进行了分析和展望。     

Ionic/electronic conductivity regulation of n-type polyoxadiazole lithium sulfonate conductive polymer binders for high-performance silicon microparticle anodes

Low-cost silicon microparticles(SiMP),as a substitute for nanostructured silicon,easily suffer from cracks and fractured during the electrochemical cycle.A novel n-type conductive polymer binder with excellent electronic and ionic conductivities as well as good adhesion,has been successfully designed and applied for high-performance SiMP anodes in lithium-ion batteries to address this problem.Its unique features are attributed to the stro ng electron-withdrawing oxadiazole ring structure with sulfonate polar groups.The combination of rigid and flexible components in the polymer ensures its good mechanical strength and ductility,which is beneficial to suppress the expansion and contraction of SiMP s during the charge/discharge process.By fine-tuning the monomer ratio,the conjugation and sulfonation degrees of the polymer can be precisely controlled to regulate its ionic and electronic conductivities,which has been systematically analyzed with the help of an electrochemical test method,filling in the gap on the conductivity measurement of the polymer in the doping state.The experimental results indicate that the cell with the developed n-type polymer binder and SiMP(~0.5 μm) anodes achieves much better cycling performance than traditional non-conductive binders.It has been considered that the initial capacity of the SiMP anode is controlled by the synergetic effect of ionic and electronic conductivity of the binder,and the capacity retention mainly depends on its electronic conductivity when the ionic conductivity is sufficient.It is worth noting that the fundamental research of this wo rk is also applicable to other battery systems using conductive polymers in order to achieve high energy density,broadening their practical applications.     

Combination of RSM and NSGA-II algorithm for optimization and prediction of thermal conductivity and viscosity of bioglycol/water mixture containing SiO2 nanoparticles

The fluids containing nanoparticles have enhanced thermo-physical characteristics in comparison with conventional fluids without nanoparticles. Thermal conductivity and viscosity are thermo-physical properties that strongly determine heat transfer and momentum. In this study, the response surface method was firstly used to derive an equation for the thermal conductivity and another one for the viscosity of bioglycol/water mixture (20:80) containing silicon dioxide nanoparticles as a function of temperature as well as the volume fraction of silicon dioxide. Then, NSGA-II algorithm was used for the optimization and maximizing thermal conductivity and minimizing the nanofluid viscosity. Different fronts were implemented and 20th iteration number was selected as Pareto front. The highest thermal conductivity (0.576 W/m.K) and the lowest viscosity (0.61 mPa.s) were obtained at temperature on volume concentration of (80 °C and 2%) and (80 °C without nanoparticle) respectively. It was concluded that the optimum thermal conductivity and viscosity of nanofluid could be obtained at maximum temperature (80 °C) or a temperature close to this temperature. An increase in the volume fraction of silicon dioxide led to the enhancement of thermal conductivity but the solution viscosity was also increased. Therefore, the optimum point should be selected based on the system requirement.     

Tailoring the Thermal Conductivity of Rubber Nanocomposites by Inorganic Systems: Opportunities and Challenges for Their Application in Tires Formulation

The development of effective thermally conductive rubber nanocomposites for heat management represents a tricky point for several modern technologies, ranging from electronic devices to the tire industry. Since rubber materials generally exhibit poor thermal transfer, the addition of high loadings of different carbon-based or inorganic thermally conductive fillers is mandatory to achieve satisfactory heat dissipation performance. However, this dramatically alters the mechanical behavior of the final materials, representing a real limitation to their application. Moreover, upon fillers’ incorporation into the polymer matrix, interfacial thermal resistance arises due to differences between the phonon spectra and scattering at the hybrid interface between the phases. Thus, a suitable filler functionalization is required to avoid discontinuities in the thermal transfer. In this challenging scenario, the present review aims at summarizing the most recent efforts to improve the thermal conductivity of rubber nanocomposites by exploiting, in particular, inorganic and hybrid filler systems, focusing on those that may guarantee a viable transfer of lab-scale formulations to technological applicable solutions. The intrinsic relationship among the filler’s loading, structure, morphology, and interfacial features and the heat transfer in the rubber matrix will be explored in depth, with the ambition of providing some methodological tools for a more profitable design of thermally conductive rubber nanocomposites, especially those for the formulation of tires.